EDP Sciences logo
Access to the submission and peer-review system
Sciengine logo
Search
Menu
All issues Volume 9 (2026) Sust. Build., 9 (2026) 4 References
Open Access
Issue
Sust. Build.
Volume 9, 2026
Article Number 4
Number of page(s) 13
Section Modelling and Optimisation of Building Performance
DOI https://doi.org/10.1051/sbuild/2026001
Published online 10 June 2026
  1. M. Stodola, S. Frolík, Self-calibration method of binocular vision based on conformal geometric algebra, Math. Methods Appl. Sci. 47, 1289–1304 (2024) [Google Scholar]
  2. L. Kant, A. Samanta, Nonlinear analysis of building structures resting on soft soil considering soil-structure interaction and structure-soil-structure interaction, J. Inst. Eng. India Ser. A 105, 475–485 (2024) [Google Scholar]
  3. H. Safaei, E. Selahi, H. Fahham, M. Azadi, Finite element modeling of 3D stitch fabric textile in meso-scale under compression loading, Mech. Compos. Mater. 60, 977–986 (2024) [Google Scholar]
  4. P. Tecmer, M. Galynska, L. Szczuczko, Geminal-based strategies for modeling large building blocks of organic electronic materials, J. Phys. Chem. Lett. 14, 9909–9917 (2023) [Google Scholar]
  5. F. Cannizzaro, B. Pantò, S. Caddemi, I. Caliò, Discrete modelling of externally bonded composite layers on masonry structures, Compos. Struct. 315, 1.1–1.21 (2023) [Google Scholar]
  6. M.J.J. Bucher, M.A. Kraus, R. Rust, S. Tang, Performance-based generative design for parametric modeling of engineering structures using deep conditional generative models, Autom. Constr. 156, 105128.1–105128.20 (2023) [Google Scholar]
  7. G. Hunter, L. Djumas, B.A. Molotnikov, Modeling of 3D brick-and-mortar structures using cohesive zone finite elements, Adv. Eng. Mater. 26, 2301146-1–2301146-9 (2024) [Google Scholar]
  8. J. Shayanfar, J.A.O. Barros, M. Rezazadeh, Stress-strain model for FRP-confined circular concrete columns developing structural softening behavior, J. Compos. Constr. 28, 1.1–1.20 (2024) [Google Scholar]
  9. D. Addessi, P. Di Re, C. Gatta, E. Sacco, Non-uniform TFA reduced multiscale procedure for shell-3D modeling of periodic masonry structures, Mech. Res. Commun. 130, 1–10 (2023) [Google Scholar]
  10. L. Strauss, R. Walls, Modeling of composite structures in fire using a coupled skeletal frame and floor system analysis: slab panel method, J. Struct. Eng. 149, 4022235.1–4022235.13 (2023) [Google Scholar]
  11. A. Babar, H. Ghulam, M.B.I. Muhammad, Mechanical characterization of innovative 3D-printed auxetic (NPR) structures: role of considering anisotropy on accuracy of numerical modeling, Int. J. Adv. Manuf. Technol. 130, 4845–4859 (2024) [CrossRef] [Google Scholar]
  12. P.R. Prem, P.S. Ambily, S. Kumar, S.B. Ghodke, A theoretical model to predict the structural buildability of 3D printable concrete, Mech. Time-Depend. Mater. 28, 2661–2679 (2024) [Google Scholar]
  13. A. Akolu, J. D'Anna, R. Ramirez, F. Solarino, A. Romanazzi, M.P. Ciocci et al., Simulation of blind prediction and post-diction shaking table tests on a masonry building aggregate using a continuum modelling approach, Bull. Earthq. Eng. 22, 6163–6193 (2024) [Google Scholar]
  14. V.A. Zorin, N.T. Minh, Prediction of the residual service life of hydraulic motors of construction machines based on the results of simulation modeling, Steel Transl. 54, 676–680 (2024) [Google Scholar]
  15. R.B.A.D. Sousa, A.K. Leung, J.A. Knappett, X. Zhang, Strength and stiffness anisotropy of 3D-printed coarse root analogues for small-scale physical modelling, Geotech. Lett. 14, 139–144 (2024) [Google Scholar]
  16. E.I. Ramírez, R. Osvaldo, R.R. Carlos, O. Armando, Preform geometry determination for a connecting rod forging by CEL model in ABAQUS, Int. J. Adv. Manuf. Technol. 127, 5569–5576 (2023) [Google Scholar]
  17. D. Vigh, J. Xu, C.K. Glaccum, Sparse-node acquisition for data fitting velocity model building, Geophys. Prospect. 71, 1540–1550 (2023) [Google Scholar]
  18. G. Kerekes, V. Schwieger, An approach for considering the object surface properties in a TLS stochastic model, J. Appl. Geod. 18, 115–131 (2024) [Google Scholar]
  19. A.A. Movchan, A.M. Rikhmaer, Structural-simulation model for the deformation of shape memory alloys: I. Description of the orientational transformation effect, Russ. Metall. (Metally) 2024, 270–277 (2024) [Google Scholar]
  20. Y. Dong, Y. Yang, Simulation of digital reconstruction of building model based on improved minimum spanning tree, Comput. Simul. 40, 197–201 (2023) [Google Scholar]
  21. A.K. Legesse, B. Abera, A. Mekonnin, Effects of project management practices on the performance of Ethiopian National Stadium, Ethiop. J. Sport Sci. 5, 19–42 (2024) [Google Scholar]
  22. H. Mujtahid, S.V. Machdum, Dynamics of advocacy and community empowerment stage through the resettlement action plan program for the Kampung Bayam community in the construction of the Jakarta International Stadium project by PT Jakarta Propertindo, J. Indones. Sos. Sci. 5, 924–934 (2024) [Google Scholar]
  23. L.B. Rashid, A. Musah, R.K. Amoah, Technoeconomic feasibility of renewable energy systems for sporting stadiums, Int. J. Energy Res. 2025, 1–11 (2025) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.