Open Access
Issue
Sust. Build.
Volume 9, 2026
Article Number 2
Number of page(s) 14
Section Green Retrofit
DOI https://doi.org/10.1051/sbuild/2025011
Published online 26 January 2026
  1. B. Peng et al., Experimental investigation on the performance of historical squat masonry walls strengthened by UHPC and reinforced polymer mortar layers, Appl. Sci. 9, 2096 (2019) [Google Scholar]
  2. T. Huo et al., China's building stock estimation and energy intensity analysis, J. Clean. Prod. 207, 801–813 (2019) [Google Scholar]
  3. D. Wang, Y. Zhu, M. Zhao, Q. Lv, Multi-dimensional hollowing characteristics of traditional villages and its influence mechanism based on the micro-scale: A case study of Dongcun Village in Suzhou, China, Land Use Policy, 101, 105146 (2021) [Google Scholar]
  4. B. Wu, L. Liu, Social capital for rural revitalization in China: A critical evaluation on the government's new countryside programme in Chengdu, Land Use Policy, 91, 104268 (2020) [Google Scholar]
  5. L. Cheng, China's rural transformation under the Link Policy: A case study from Ezhou, Land Use Policy, 103, 105319 (2021) [Google Scholar]
  6. Ministry of Housing and Urban-Rural Development (MOHURD), Notice of the ministry of housing and urban-rural development on the prevention of large-scale demolition and construction in the implementation of urban renewal actions, 2021, Available from: http://www.gov.cn/zhengce/zhengceku/2021-08/31/content_5634560.htm [Google Scholar]
  7. Jiangsu Provincial Department of Agriculture and Rural Affairs, Notice of strengthening and regulating the management of rural homestead, 2020, Available from: http://nynct.jiangsu.gov.cn/art/2020/6/10/art_11977_9203978.html [Google Scholar]
  8. Ministry of Housing and Urban-Rural Development, Technical guide for the appraisal of the safety of rural housing, 2019, Available from: http://www.gov.cn/xinwen/2019-12/04/content_5458282.htm [Google Scholar]
  9. B. Chen, Z. Yao, H. Zhang, C. Nolf, Design research on landscape-led rural revitalization, Chin. Landsc. Arch. 36, 58–62 (2020) [Google Scholar]
  10. B. Chen, Y. Ding, Z. Liu, Research on ecosystem-led lifecycle rural planning and design: a case study of maiweng ancient village of the bouyei ethnic group in guiyang, J. Human Settlements West China, 37, 134–140 (2022) [Google Scholar]
  11. X.E. Yang et al., Issues and challenges of implementing comprehensive renovation at aged communities: A case study of residents' survey, Energy Build. 249, 111231 (2021) [Google Scholar]
  12. Ü. Alev et al., Renovation alternatives to improve energy performance of historic rural houses in the Baltic Sea region, Energy Build. 77, 58–66 (2014) [Google Scholar]
  13. Y. Lu, J. Qian, Towards a material approach in rural geography: Architectural experiments in China's rural renaissance and reconstruction movements, Geoforum, 116, 119–129 (2020) [Google Scholar]
  14. R. Pernice, B. Chen, L. Cardellicchio, Introduction, in introduction, in: R. Pernice, B. Chen (Eds.), Australia and China Perspectives on Urban Regeneration and Rural Revitalization, R. Pernice and B. Chen, Editors. 2024, https://doi.org/10.4324/9781003414186-1 [Google Scholar]
  15. P.C.P. Silva, M. Almeida, L. Bragança, V. Mesquita, Development of prefabricated retrofit module towards nearly zero energy buildings, Energy Build. 56, 115–125 (2013) [Google Scholar]
  16. R. Maio, T.M. Ferreira, R. Vicente, A. Costa, Is the use of traditional seismic strengthening strategies economically attractive in the renovation of urban cultural heritage assets in Portugal? Bull. Earthq. Eng. 17, 2307–2330 (2019) [Google Scholar]
  17. F.-F. Wei, Y.-H. Zhu, J. Yu, Y.-Q. Wang, Experimental study of seismic behaviour of renovated masonry structures after removing walls and seismic retrofitting, J. Build. Eng. 31, 101360 (2020) [Google Scholar]
  18. Y. Tan et al., An empirical study of green retrofit technologies and policies for aged residential buildings in Hong Kong, J. Build. Eng. 39, 102271 (2021) [Google Scholar]
  19. M. Tahsildoost, Z. Zomorodian, Energy, carbon, and cost analysis of rural housing retrofit in different climates, J. Build. Eng. 30, 101277 (2020) [Google Scholar]
  20. J. Hou et al., Comparative study of commercial building energy-efficiency retrofit policies in four pilot cities in China, Energy Policy, 88, 204–215 (2016) [Google Scholar]
  21. L. Jia, Q.K. Qian, F. Meijer, H. Visscher, Exploring key risks of energy retrofit of residential buildings in China with transaction cost considerations, J. Clean. Prod. 293, 126099 (2021) [Google Scholar]
  22. Z. Mayer, R. Volk, F. Schultmann, Analysis of financial benefits for energy retrofits of owner-occupied single-family houses in Germany, Build. Environ. 211, 108722 (2022) [Google Scholar]
  23. H.F. Castleton, V. Stovin, S.B.M. Beck, J.B. Davison, Green roofs; building energy savings and the potential for retrofit, Energy Build. 42, 1582 −1591 (2010) [Google Scholar]
  24. X. Chen, M. Cimillo, D. Chow, B. Chen, Assessing the energy performance and retrofit potential of the 1980-1990s' residential building stock in China's Jiangsu province: a simulation-based study, Energies, 17, 1260 (2024) [Google Scholar]
  25. W.Q. Tham, S. Chandra, B. Norton, S. McCormack, Introducing luminescent solar waveguides for sustainable buildings for enhanced circadian rhythm regulation, Sust. Build. 6, 6 (2023) [Google Scholar]
  26. Y. Liu, T. Liu, S. Ye, Y. Liu, Cost-benefit analysis for energy efficiency retrofit of existing buildings: a case study in China, J. Clean. Prod. 177, 493–506 (2018) [Google Scholar]
  27. C. Bai, Z. Yang, Optimization method of building energy efficiency design based on decomposition multi objective and agent assisted model, Sust. Build. 7, 4 (2024) [Google Scholar]
  28. Y. Xing, N. Hewitt, P. Griffiths, Zero carbon buildings refurbishment--A Hierarchical pathway, Renew. Sustain. Energy Rev. 15, 3229–3236 (2011) [Google Scholar]
  29. S.A. Sharif, A. Hammad, Simulation-based multi-objective optimization of institutional building renovation considering energy consumption, life-cycle cost and life-cycle assessment, J. Build. Eng. 21, 429–445 (2019) [Google Scholar]
  30. G.A. Blengini, Life cycle of buildings, demolition and recycling potential: A case study in Turin, Italy, Build. Environ. 44, 319–330 (2009) [Google Scholar]
  31. L. Belussi et al., A review of performance of zero energy buildings and energy efficiency solutions, J. Build. Eng. 25, 100772 (2019) [Google Scholar]
  32. M. Rehm, R. Ade, Construction costs comparison between ‘green’ and conventional office buildings, Build. Res. Inf. 41, 198–208 (2013) [Google Scholar]
  33. D. Quiun, P. Mamani, Cyclic load behavior of confined masonry walls of horizontally-hollow bricks retrofitted with wire meshes, in: 16th World Conference on Earthquake, 2017, p. 1–12 [Google Scholar]
  34. M. Diaz, C. Zavala, J. Gallardo, L. Lavado, Experimental study of non-engineered confined masonry walls retrofitted with wire mesh and cement-sand mortar, in: 16th World Conference on Earthquake, 2017 [Google Scholar]
  35. C. Shermi, R.N. Dubey, In-plane behaviour of unreinforced masonry panel strengthened with welded wire mesh and mortar, Constr. Build. Mater. 178, 195–203 (2018) [Google Scholar]
  36. C. Shermi, R.N. Dubey, Study on out-of-plane behaviour of unreinforced masonry strengthened with welded wire mesh and mortar, Constr. Build. Mater. 143, 104–120 (2017) [Google Scholar]
  37. J. Luzar et al., NMR spectroscopy-supported design and properties of air lime-white cement injection grouts for strengthening of historical masonry buildings, Constr. Build. Mater. 250, 118937 (2020) [Google Scholar]
  38. A. Kalagri, A. Miltiadou-Fezans, E. Vintzileou, Design and evaluation of hydraulic lime grouts for the strengthening of stone masonry historic structures, Mater. Struct. 43, 1135–1146 (2010) [Google Scholar]
  39. E. Luso, P.B. Lourenço, Experimental laboratory design of lime based grouts for masonry consolidation, Int. J. Arch. Heritage, 11, 1143–1152 (2017) [Google Scholar]
  40. A. Goswami, S.D. Adhikary, Retrofitting materials for enhanced blast performance of Structures: Recent advancement and challenges ahead, Constr. Build. Mater. 204, 224–243 (2019) [Google Scholar]
  41. L.-J. Ouyang, W.-Y. Gao, B. Zhen, Z.-D. Lu, Seismic retrofit of square reinforced concrete columns using basalt and carbon fiber-reinforced polymer sheets: A comparative study, Compos. Struct. 162, 294–307 (2017) [Google Scholar]
  42. D. Richard, S.A.S. Iacobucci, B. Oguzhan, Retrofit of square concrete columns with carbon fiber-reinforced polymer for seismic resistance, ACI Struct. J. 100, (2003) https://doi.org/10.14359/12845 [Google Scholar]
  43. J. Ortega et al., Traditional earthquake resistant techniques for vernacular architecture and local seismic cultures: a literature review, J. Cultural Heritage, 27, 181–196 (2017) [Google Scholar]
  44. Masonry structure reinforcement and repair, in: 15G611, China Planning Press, 2015 [Google Scholar]
  45. A. Borri, G. Castori, A. Grazini, Retrofitting of masonry building with reinforced masonry ring-beam, Constr. Build. Mater. 23, 1892–1901 (2009) [Google Scholar]
  46. S. Altin, Ö. Anil, M.E. Kara, Improving shear capacity of existing RC beams using external bonding of steel plates, Eng. Struct. 27, 781–791 (2005) [Google Scholar]
  47. C. Zhou, X. Li, D. Wang, S. Xia, Analysis of bearing capacity and seismic performance of circular RC columns strengthened with externally wrapped steel plates, Adv. Civil Eng. 2019, 2515091 (2019) [Google Scholar]
  48. B.B. Adhikary, H. Mutsuyoshi, Shear strengthening of reinforced concrete beams using various techniques, Constr. Build. Mater. 20, 366–373 (2006) [Google Scholar]
  49. R.A. Barnes, P.S. Baglin, G.C. Mays, N.K. Subedi, External steel plate systems for the shear strengthening of reinforced concrete beams, Eng. Struct. 23, 1162–1176 (2001) [Google Scholar]
  50. Y.-W. Lin, D. Biggs, L. Wotherspoon, J.M. Ingham, In-plane strengthening of unreinforced concrete masonry wallettes using ECC shotcrete, J. Struct. Eng. 140, 04014081 (2014) [Google Scholar]
  51. Y. Lin, D. Lawley, L. Wotherspoon, J.M. Ingham, Out-of-plane testing of unreinforced masonry walls strengthened using ECC shotcrete, Structures, 7, 33–42 (2016) [CrossRef] [Google Scholar]
  52. Y.-W. Lin, L. Wotherspoon, A. Scott, J.M. Ingham, In-plane strengthening of clay brick unreinforced masonry wallettes using ECC shotcrete, Eng. Struct. 66, 57–65 (2014) [Google Scholar]
  53. V.C. Li, On engineered cementitious composites (ECC) a review of the material and its applications, J. Adv. Concrete Technol. 1, 215–230 (2003) [Google Scholar]
  54. X.-Y. Shang, J.-T. Yu, L.-Z. Li, Z.-D. Lu, Strengthening of RC structures by using engineered cementitious composites: a review, Sustainability 11, 3384 (2019) [Google Scholar]
  55. W. Meng, K.H. Khayat, Y. Bao, Flexural behaviors of fiber-reinforced polymer fabric reinforced ultra-high-performance concrete panels, Cement Concrete Compos. 93, 43–53 (2018) [Google Scholar]
  56. N.M. Azmee, N. Shafiq, Ultra-high performance concrete: from fundamental to applications, Case Stud. Constr. Mater. 9, e00197 (2018) [Google Scholar]
  57. M. Zhou, W. Lu, J. Song, G.C. Lee, Application of ultra-high performance concrete in bridge engineering, Constr. Build. Mater. 186, 1256–1267 (2018) [CrossRef] [Google Scholar]
  58. T. Li, M. Deng, Y. Ma, Y. Zhang, Study on axial compressive performance of HDC-masonry composite elements, Constr. Build. Mater. 304, 124593 (2021) [Google Scholar]
  59. M. Deng, T. Li, Y. Zhang, Compressive performance of masonry columns confined with highly ductile fiber reinforced concrete (HDC), Constr. Build. Mater. 254, 119264 (2020) [Google Scholar]
  60. S.P.D.O.H.A.U.-R. Development, Technical specification for strengthening with high ductile concrete, in: DBJ04/T397-2019, China Building Materials Industry Press, 2019 [Google Scholar]
  61. A.P.D.O.H.A.U.-R. Development, Technical specification for application of high ductile concrete, in: DB34/T3469-2019, 2019 [Google Scholar]
  62. M. Deng, M. Zhang, Z. Zhu, F. Ma, Deformation capacity of over-reinforced concrete beams strengthened with highly ductile fiber-reinforced concrete, Structures, 29, 1861–1873 (2021) [Google Scholar]
  63. M. Deng et al., Analysis of compressive toughness and deformability of high ductile fiber reinforced concrete, Adv. Mater. Sci. Eng. 2015, 384902 (2015) [Google Scholar]
  64. M. Kunieda, K. Rokugo, Recent progress on HPFRCC in Japan required performance and applications, J. Adv. Concrete Technol. 4, 19–33 (2006) [Google Scholar]
  65. N. Sathiparan, P. Mayorca, K. Meguro, Shake table tests on one-quarter scale models of masonry houses retrofitted with PP-band mesh, Earthq. Spectra, 28, 277–299 (2012) [Google Scholar]
  66. A. Chourasia, S. Singhal, J. Parashar, Experimental investigation of seismic strengthening technique for confined masonry buildings, J. Build. Eng. 25, 100834 (2019) [Google Scholar]
  67. S.M. Umair, M. Numada, M.N. Amin, K. Meguro, Fiber reinforced polymer and polypropylene composite retrofitting technique for masonry structures, Polymers, 7, 963–984 (2015) [Google Scholar]
  68. Z. Shehu, I.R. Endut, A. Akintoye, G.D. Holt, Cost overrun in the Malaysian construction industry projects: A deeper insight, Int. J. Project Manag. 32, 1471–1480 (2014) [Google Scholar]
  69. R. Shipley, S. Utz, M. Parsons, Does adaptive reuse pay? A study of the business of building renovation in Ontario, Canada, Int. J. Heritage Stud. 12, 505–520 (2006) [Google Scholar]
  70. M. Filippi, Remarks on the green retrofitting of historic buildings in Italy, Energy Build. 95, 15–22 (2015) [Google Scholar]
  71. P.G. Asteris et al., Seismic vulnerability assessment of historical masonry structural systems, Eng. Struct. 62–63, 118–134 (2014) [Google Scholar]
  72. P.B. Lourenço et al., Simplified indexes for the seismic assessment of masonry buildings: International database and validation, Eng. Fail. Anal. 34, 585–605 (2013) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.